How To Program Uverse Black Remote Control Part 4 (for other devices): S10-S3, S10-S2, S10-S1

To program s10-s3 with home theater in box (HTIB); receiver or tuner; amplifier; and dvd-vcr combo:
1. Press and hold both the AUX and the ENTER/OK buttons at the same time.
2. After a second or two, release both keys and enter the code for your htib. To test try powering on and off your device. If the code you have tried doesn't work, try another code and follow the same steps.
3. Once you have the remote control programmed, as a constant reminder, press the AT&T button to prevent any inconvenience.

I have arranged the codes alphabetically. Check the label and click the picture for you to get the codes.

figure 1. codes for HTIB

FOR RECEIVER OR TUNER:

figure 2.codes for tuner/receiver

FOR AMPLIFIER: 

figure 3. codes for amplifier

FOR TV-DVD COMBO:

figure 4. codes for tv-dvd combo

FOR TV-VCR COMBO:

figure 5. codes for tv-vcr combo

FOR TV-VCR-DVD COMBO:

figure 6. tv-vcr-dvd combo

FOR TV-DVD-TUNER COMBO:

figure 7. tv-dvd-tuner combo

FOR DVD-VCR COMBO:

figure 8. dvd-vcr combo

Please note that for the TV combo you need to follow the steps on programming the remote control with TV.

How To Program Uverse Black Remote Control Part 3 (For VCR and DVR): S10-S3, S10-S2, S10-S1

This is a continuation of programming a Uverse remote control s10-s3. You can always check the other blogs that I have which have the manufacture codes for TV and DVD.

I have arranged the codes alphabetically. Check the label and click the picture for you to get the codes.

To program your Uverse remote control to work with your VCR or DVR, you need to: 

1. Hold down BOTH the AUX and OK/ENTER simultaneously. 

2. After a second or two, release and enter the code manually. Check the pictures below for the code that corresponds to your device.

figure 1. A-S

figure 2. S-Z

3. To test if the code that you tried works, press power. If it powers off then try to power on again. You can try all the codes listed for your device if one code doesn't work and repeat the steps.

4. Once you have the remote control programmed, as a constant reminder, press again the AT&T button to prevent any inconvenience.