How To Program Uverse Black Remote Control Part 4 (for other devices): S10-S3, S10-S2, S10-S1

To program s10-s3 with home theater in box (HTIB); receiver or tuner; amplifier; and dvd-vcr combo:
1. Press and hold both the AUX and the ENTER/OK buttons at the same time.
2. After a second or two, release both keys and enter the code for your htib. To test try powering on and off your device. If the code you have tried doesn't work, try another code and follow the same steps.
3. Once you have the remote control programmed, as a constant reminder, press the AT&T button to prevent any inconvenience.

I have arranged the codes alphabetically. Check the label and click the picture for you to get the codes.

figure 1. codes for HTIB

FOR RECEIVER OR TUNER:

figure 2.codes for tuner/receiver

FOR AMPLIFIER: 

figure 3. codes for amplifier

FOR TV-DVD COMBO:

figure 4. codes for tv-dvd combo

FOR TV-VCR COMBO:

figure 5. codes for tv-vcr combo

FOR TV-VCR-DVD COMBO:

figure 6. tv-vcr-dvd combo

FOR TV-DVD-TUNER COMBO:

figure 7. tv-dvd-tuner combo

FOR DVD-VCR COMBO:

figure 8. dvd-vcr combo

Please note that for the TV combo you need to follow the steps on programming the remote control with TV.